From Unreal Wiki, The Unreal Engine Documentation Site
Jump to navigation Jump to search
UT :: Actor (UT) >> Pawn (UT) >> ScriptedPawn (Package: UnrealShare)

Note: In UT200x, ScriptedPawn was replaced by a scheme using some other variety of Pawn in conjunction with a ScriptedController, or a subclass thereof.

This class is the abstract base class for UT's NPC "Monsters" (Skaarj, Nali, etc.) Some monsters are treated as a group, for example the BiterFish; these are subclassed from FlockPawn and controlled with a subclass of FlockMasterPawn.

As anyone who has played Unreal I knows, extremely complex behaviour is possible with monsters: they can patrol an area by default, and perform a specific action (such as running to push an alarm button) when they see the player.

This behaviour is set using several other actors that work with ScriptedPawn subclasses.

Related Actors

The main actors you should use when scripting a pawn are the AlarmTag, Patrolpoint and homebase and of course some options in the pawns preferences under the AI and Order property sections. (Please take note that for any of these actors to work you need to pathnode the level first.)


An AlarmPoint is an actor that the Pawns react to when they are "startled" – or more simply put when they see the player/players.


An AmbushPoint defines a good place for the Pawn to wait for a player enemy to attack.


A PatrolPoint is helpful when you need to make your pawns walk about in an area without looking too alarmed. That helps the pawns to look more life like (They just dont stand around and wait for the player). Look at the "Order-Tab" section below to see how you set the pawn to do this.


When a pawn is hurt or if its just really chicken it will seek its way to its HomeBase (prefably this is a place out of the way or a place where the pawn can get backup). The Tag of the HomeBase should be the same as the tag of the creatures who are to use it.

Known Subclasses

Many of these creatures also appear in the Invasion gametype in UT200x as subclasses of Monster.

  +- Amoeba (aka ParentBlob) >>
  +- Brute
  |   +- Behemoth
  |   +- LesserBrute
  +- Cow
  |   +- BabyCow
  +- Devilfish
  +- Fly (aka Razorfly) >>
  +- Follower (ONP)
  +- Gasbag
  |   +- GiantGasbag
  +- Krall
  |   +- EliteKrall
  |   +- LesserKrall
  +- Manta
  |   +- GiantManta
  +- Mercenary
  |   +- MercenaryElite
  +- Nali
  |   +- NaliPriest
  +- NaliRabbit
  +- Predator (aka PackHunter)
  +- Pupae (aka SkaarjPupae)
  +- Queen
  +- Skaarj
  |   +- FireSkaarj (UT200x only)
  |   +- IceSkaarj (UT200x only)
  |   +- SkaarjTrooper (UT only)
  |   |   +- SkaarjGunner
  |   |   +- SkaarjInfantry
  |   |   +- SkaarjOfficer
  |   |   +- SkaarjSniper
  |   +- SkaarjWarrior (UT only)
  |       +- IceSkaarj
  |       +- SkaarjAssassin
  |       +- SkaarjBeserker
  |       +- SkaarjLord
  |       +- SkaarjScout
  +- Spinner
  +- Squid
  +- Slith
  +- Tentacle
  +- Titan
  |   +- StoneTitan
  +- WarLord


Some of the property groups are defined in the Pawn (UT) class and then receive extra properties in ScriptedPawn. In the interest of clarity, this page lists all the properties from the groups. We'll copy the relevant ones across to Pawn (UT) later...


Determines the current behaviour:
  • |ATTITUDE_Fear| The pawn will try to make a run for it when it sees the player.
  • |ATTITUDE_Hate| The pawn will attack the player.
  • |ATTITUDE_Frenzy| The pawn acts a bit less concentrated with less accuracy. The pawn will fight to the end and never flees.
  • |ATTITUDE_Threaten| The pawn will make hostile motions but will wait for the player to initiate combat.
  • |ATTITUDE_Ignore| The pawn will ignore the player.
  • |ATTITUDE_Friendly| The pawn wont attack the player and, if possible, will fight the players enemies.
  • |ATTITUDE_Follow| Not implemented.
  • |ATTITUDE_MAX| Not implemented.
bool bHateWhenTriggered 
If set to true the pawn will start to hate the player when triggered.
bool bIgnoreFriends 
If set to true the pawn will disregard rank of its team and hunt after the player in their solitude.
bool bIsBoss 
Looking quickly at the script, it appears this gives the monster extra health & other things too...
bool bQuiet 
The pawn will play no sounds (good for surprise attacks).
bool bTeamLeader 
If part of a team (more on that later) and this tab is set to true the actor will resume command over the rest of the pawns who holds the same TeamTag as this one.
I never messed around with this one.
float PheriperalVision 
Inverse Cosine of this number determines how far to each side the pawn can see things. So, -1.0 means that it can even see something directly behind it.
Defines how far the pawn can see.
Defines how good the pawn is at fighting. This stretches from their aim to the way and speed they move at. The higher number the better the pawn is.
name TeamTag 
see bTeamLeader


name AlarmTag 
See AlarmPoint.
bool bDelayedPatrol 
If set to true the pawn must be triggerd before he starts his patrol. This is done by placeing a trigger and put the tag of the pawn in the event of the trigger.
bool bFixedStart 
Used in conjunction with the Ambushing orders, to allow a pawn to optionally enter the level at an alternate location.
According to the script comments, this sets the monster's initial state, and furthermore if the monster changes state it will try and return to the state set here. See the list of states further down this page for possible settings.
name OrderTag 
OrderTag defines the actor on which the order set in the "Orders" tab to be carried out
name SharedAlarmTag 
Multiple Pawns can use the same AlarmTags – set the tag of the alarmpoint in this tab





Set these with the Orders property. A pawn can have one of many different Orders. Note that many of the subclasses of ScriptedPawn add new states, for example WarLord.

See also ScriptedPawn/States for a complete list of ScriptedPawn states.

Order States

These states are typical Orders for mappers to set.

This is the default state (though it's not shown in the tab). The creature will stay near it's placed position and randomly wander nearby until an enemy is seen to attack. After combat, the creature will return to this Waiting state and wander around randomly from that position.
The pawn is waiting for an enemy to attack so they are more alert than regular. They may, according to Epics Unrealtech site, play different Idle-anims. If AmbushPoints are placed and their Tags match the OrderTag of the pawn, the creature will be teleported randomly to one of the AmbushPoints at match start if bFixedStart is false. There can be multiple AmbushPoints for the same pawn.
Guarding pawns will guard the actor whose Tag is set to match their OrderTag. They will remain at the placed position and return to that position after combat. If their attitude is ATTITUDE_Threatening they will try to make outbursts to scare the player to flee. They will try to remain between the player and the actor they guard. If the player touches the actor the pawn will attack.
This with the OrderTag set to a PatrolPoint will let make the pawn patrol. They will leave the patrol for combat and return to the patrol route afterwards.

Custom ScriptedPawns

Add your own .u files or how to make origional pawns into new ones here


Related Topics


Icedude: (author)

Erdrik: (contributed to functions) Just setting up, I'll Return with info on Coding custom attributes, ect for new ScriptedPawns. Going from memory right now, when I return I'll have a more orginized setup ;)

Unknown: Question: what happens if (Orders) are set with InitialState?

Unknown: This is for abstraction reasons thus allowing the coders to internally change the orders handling code without having to worry about incompatibilities whatsoever...

SuperApe: It appears that all the ScriptedPawn states are hidden. You should not be able to see them in InitialState. Also, it's important for ScriptedPawn to first go through it's (auto) StartUp state so that basic things like Homebase, AlarmPoint, OrderObject, etc. can be set properly.

SuperApe: Marked up, minor edits.

Drake Kobra: Does anyone know what each value gives specifically for skill, or at least what the range is?

Category:Legacy Class (UT)

Category:Legacy To Do – Fill in most important functions with brief descriptions. Fill in remaining property variable types. Fill in package name.